How to fix a Washing Machine that has no water entering it

How to fix a washing machine that has not water entering it

Good day! Have you ever encountered the terrifying circumstance where your washing machine appears to have taken a water vacation? Trust me, we’ve all been there: staring blankly at a basket of dirty laundry while pondering why the machine simply won’t fill.

But do not be alarmed; you have arrived at the most effective washing machine rescue operation. In this blog, we’re diving right into the world of washing machine troubleshooting. We’ll act as your DIY investigators, equipped with all the tricks and pointers you need to get that water flowing once more.

Here are some possible checkpoints for you need to consider in a washing machine that has no water entering it

Low water Pressure

Low water pressure is a result of many factors. It is essential to comprehend the causes of this issue and how to test for it in order to troubleshoot and fix it.

There are a number of causes for low water pressure, including:

Issues with the water supply:

Issues with the main water line supplying water to your area may be to blame for decreased water pressure. It can be easily checked by checking the water pressure in other outlets in your house.

You may need to get in touch with your neighborhood water utility company because this problem is out of your hands.

Water inlet valve malfunction or obstruction

The washing machine’s water inlet valve regulates the amount of water that enters the machine. Low pressure can result from a valve that is defective or clogged with debris because it restricts the flow of water.


Partially closed shut-off valves:

Check the shut-off valves connected to the water supply hoses leading to the washing machine to see if they are partially closed.

Such conditions may result in a decrease in water pressure if these valves are not fully open.

Damaged water inlet hose

A kinked or damaged water inlet hose can obstruct the flow of water, which can result in low pressure. Check the hose for twists, kinks, or other obvious damage.

Read Also : How Does a Thermos Flask Work

How to take care of the low water pressure issue?

Make sure the washing machine’s water supply is fully turned on. Inadvertently partially closing valves can occasionally reduce water flow.

Check to see if the water pressure is low in other home fixtures or faucets. Multiple low-pressure areas indicate a problem with your system’s overall water supply. In such circumstances, get in touch with a plumber to look into and fix the problem.

Examine the washing machine’s hose that supplies water. Make sure the hose is not pinched or obstructed. Obstructions or kinks that prevent water from flowing can be the cause of low pressure.

Check the water pressure by turning on the water supply. Verify the water’s flow rate into the sink or bucket. Low water pressure is indicated if the pressure is appreciably weak or insufficient.

If the low water pressure problem does not go away, call a plumber to inspect and fix any plumbing or water supply issues in your home.

Incorrect installation of the water inlet hose

Before, calling in hefty mechanical support, you could do these things and check for your self.

Visual Inspection

Check the water inlet hose that is attached to your washing machine first. Make sure that it is securely fastened to the water supply valve as well as the washing machine.


Verify where the water inlet hose is located. It shouldn’t be overly twisted, bent, or kinked. Make sure there are no entanglements or obstructions that could prevent water from flowing.

Hose length

Check the length of the water inlet hose to make sure it is the proper length. It shouldn’t be either too brief or too lengthy. A hose that is too short or too long may cause inefficiencies or even leaks. A hose that is too short may create tension and restrict water flow.

Correcting Incorrect Water Inlet Hose Installation:

Turn off the Washing Machine’s Water Supply: Be sure to turn off the washing machine’s water supply before making any adjustments. This will stop any possible leaks or water damage while the correction is being made.

In order to restore a smooth, unhindered flow of water, carefully straighten out any bent, twisted, or kinked hoses. Make sure it is positioned correctly without any loops or tangles that could obstruct water flow.

Inspect the water inlet hose’s connections at both ends. Use pliers or a wrench to tighten them if they are not fastened properly or are loose. To prevent damage, make sure the fit is tight without being too tight.

It is recommended to replace the water inlet hose with a new one if it is clearly damaged, such as with cracks, splits, or leaks. When choosing and installing the replacement hose, stick to the instructions and specifications provided by the manufacturer.

When the necessary adjustments or replacements have been made, test for leaks by turning on the water supply and looking for any leaks near the hose connections. If you discover any leaks, tighten the connections even more or think about replacing any worn-out parts, such as washers or gaskets.

Also Read: How To Use a Yogurt Maker

Check the lid

For the washing machine to function properly, the lid must be completely closed. During the wash cycle, the lid serves as a safety mechanism to keep water from splashing out of the machine. The washing machine may prevent water from entering if the lid is not completely closed as a safety precaution.


There’s a safety feature that determines whether or not the lid is properly closed. It causes the washing machine to start the water intake process by sending a signal to the machine’s control panel.

There’s a switch attached to the hinge of the lid. The lid switch won’t work if the lid isn’t completely closed, which prevents the washing machine from starting the water intake.

That also implies that if the switch is damaged or faulty, water intake will not take place.


Check the clogged inlet screen

Another possible cause could be a clogged inlet screen. An obstruction on the inlet screen is yet another potential cause. The machine’s water inlet valve contains the inlet screen, also referred to as a filter or mesh. Its function is to catch any debris, sediments, or other particles in the water supply to stop them from getting inside the washing machine and causing harm or degrading the appliance’s performance.

A clogged inlet screen restricts or completely blocks the flow of water into the washing machine. This can result in no water entering the machine at all or a slow and inadequate water supply during the wash cycle. It is a common issue that can occur over time due to the accumulation of dirt, sediment, or other impurities in the water.

How to address this issue?

There are a few steps that must be taken in order to fix a clogged inlet screen. First, make sure the washing machine is unplugged from the power source and turned off. Find the water inlet valve, which is typically located at the machine’s back, where the water hoses are attached. Disconnect the hoses slowly, being sure to have a towel or bucket handy to catch any water that may leak out.

Examine the inlet screen for any obvious obstructions or debris after the hoses have been disconnected. Usually, a small mesh-like component serves as the screen. If accumulation is present, it can be cleaned by gently rinsing it under running water or by using a soft brush to remove the particles.

To avoid breaking or bending the screen, it must be handled carefully.

Faulty water level switch

A malfunctioning water level switch may prevent water from entering a washing machine during the wash cycle. The machine’s water level is detected by the water level switch, which also alerts the control system to start filling the machine with water.

When the water level switch isn’t working properly, it can’t accurately determine the water level or send the right signals, which prevents water from entering the washer. A faulty switch mechanism, a broken or disconnected air tube, or an electrical issue with the switch could all be to blame for this.

The water level switch typically uses air pressure to operate. It is attached to an air tube that extends from the switch to the base of the washing machine’s outer tub or drum. The air pressure inside the air tube rises as water fills the tub, alerting the water level switch that the desired water level has been reached.

However, a defective water level switch might not accurately detect a change in air pressure or might not send the right signals to the control system, which would prevent water from entering the machine.

It’s crucial to check the water level switch for any obvious flaws or damage before trying to solve this problem.

Verify that the air tube attached to the switch is firmly fastened and clear of any obstructions. It might be necessary to clean the air tube to get rid of any debris that might skew the readings on the air pressure.

It might be necessary to replace the water level switch if it is discovered to be broken. To correctly identify and fix the problem, it is advisable to consult the washing machine’s user manual or to call in an expert for assistance.

Read Also : How to Use a Hand Blender


In conclusion, if you find that your washing machine is not receiving any water during the wash cycle, there are a few potential causes and solutions to consider. Above problems—well, most of them—you can take care of, but if you are in doubt, it’s always good to get professional help.

However, remember one thing! If your washing machine is under warranty, contact the manufacturer rather than seeking outside help.


#1) Why is water not entering my washing machine?

Several issues that may prevent water from entering a washing machine have been covered in the blog above. We hope that it has given readers insightful information that will help them recognize and address the problem.

#2) Why is my washing machine humming but not filling with water?

Your washing machine may have a problem with the water supply or the water inlet valve if it is humming but not filling with water. Verify the hose connections and that the water faucets are fully turned on. Check the water inlet valve for any obstructions or broken components, as well. To fix the problem and enable water to fill the machine during the wash cycle, the valve may need to be cleaned or replaced.

#3) Why is my washing machine not spinning or draining?

Your washing machine may not be spinning or draining for a number of reasons. A drain pump filter that is clogged or blocked is a frequent reason why the water doesn’t drain properly. Another possibility is a lid switch that is malfunctioning and does not engage;. The machine may also not spin due to issues with the motor, such as a broken drive belt or a dysfunctional motor coupling. To fix the problem, it is advised to check these parts, clean the drain pump filter, confirm the lid switch is working properly, and look for any signs of wear or damage on the motor and drive belt. A professional technician may need to be consulted if troubleshooting measures fail to fix the issue.

#4) How do you check a water valve?

These steps should be followed in order to inspect a washing machine’s water valve. Turn off the water supply valves first. The washing machine’s water hoses should be disconnected. Examine the water valve to look for any obvious blemishes or leaks. By switching a multimeter to resistance (ohms) mode and touching the probes to the valve’s terminals, you can check the continuity of the valve.

If there is no continuity, a defective valve needs to be changed. By reattaching the hoses, turning on the water supply, and checking to see if water enters the machine when it is turned on, you can also test the valve’s functionality. If there is no water flow or erratic water flow, this could indicate a valve problem that needs further inspection or replacement.

Leave a Reply

Your email address will not be published. Required fields are marked *

Back To Top